 |
|
| The
Superior Horse Tying System |
| So
convenient you won't want to be without one. |
|
| INSTRUCTIONS |
Use a standard 5/8" poly
lead rope 10' long.
We recommend using a pliable
rope.
Cotton ropes are not recommended.
|
Settings
 |
Adjustment
Length
This setting is to adjust the length of your
lead rope. |
|
 |
Standard
By turning the friction screw up, increases the
amount of pull on your rope. Allows you to pick
the tension you want for your horse, or various
ropes. |
|
 |
Locked
The locked setting is good for holding up haybags.
NOT RECOMMENDED for horses. |
|
|
|
|
|
IMPORTANT
Do not
tie a stopper knot inside the trailer or while cross
tying.
The upper
setting is for adjusting the length of rope you want.
Also is the easiest pull, good for inside the trailer
or for cross ties. When you're at the length you want,
place the rope over the standard slot and pull sharply
on one side of the rope. This will quickly and easily
seat the rope in place. The bolt is to adjust the amount
of tension or pull you want for that rope or horse.
Once the bolt is set for you, you don't have to adjust
it again. To change the rope's length, just move the
rope to the upper setting again, adjust, then seat the
rope in the standard setting and you're done. |
| |
Manufactured
by: Smart-Tie Inc.
The Clip is patent pending and trademarked.
Made in the USA |
|
|
|
| ©2007 The Clip |
|
